General industry
Shafts
The Problem
Heavy wear of the shaft on the cement screw element had occurred and required repairing before potential equipment failure.
The Solution
After thorough surface preparation, the Belzona 1111 was applied by brush to the repair area. A pre-made split former was positioned over the repair area with a clamp. All excess material was removed and the repair was left to fully cure before removal of the former.
Products Applied
Belzona 1111
Tanks
The Problem
Insulated bulk holding tank containing heavy fuel oil. Corrosion under insulation had led to a through wall penetration at approximately 8m above ground level.
The Solution
Due to the urgency, the substrates were prepared by grit blasting to the desired standard, bonding a 500x500x5mm plate using Belzona 1161 and final two coat system Belzona 5811
Products Applied
Belzona 1161, Belzona 5811
Containment Areas
The Problem
The customer wished for “heavy-duty” protection of this brand new containment area before installing the machines, in order to effectively protect this area.
The Solution
Belzona 4181 had succesfully passed all the client tests (especially the high temperature) for this plant where they produce synthetic salt. The area was cleaned and prepared before the application of Belzona 4181.
Products Applied
Belzona 4181
Pump
The Problem
The pump had suffered extensive corrosion.
The Solution
Another similar pump had been coated with Belzona 3 years before and a recent inspection found it to be in an excellent condition. Based on this, Belzona were the Customer’s first call to repair this pump. It was rebuilt with Belzona 1311 and coated with Belzona 1321
Products Applied
Belzona 1311, Belzona 1321